Reference : 1467
12/24V - 40A- MPPT SOLAR CHARGE CONTROLLER
UNIMPPT 100.40/24 S converts all electrical power from your solar module into charging current to your battery.
Its ALGOTECK 6 load curve, the only one on the market, tests your battery, recharges it a 100%, desulphates it, destratifies it, maintains its charge and improves its lifespan, while taking into consideration the technology and the ambient temperature of your battery to adjust its voltage thresholds according to the recommendations of the battery manufacturers.
MPPT technology (inverter solar charge controllers), UNIMPPT uses all the panel voltage by reconverting the extra panel/battery voltage not used with a standard charge controller in charge intensity for the battery.
Its optimized MPPT programm, paired up with one of the fastest microprocessors on the market, searches in real-time (every 100ms), the maximum power point of the panel. UNIMPPT guarantees up to 40% more energy in winter and 15% more in summer compared to a PWM charge controller, even under the most uncertain weather conditions.
|Nominal charging current||40 A||Maximum voltage||100 V|
|Maximum power||600 W||Voltage selection||auto|
|Type of battery selection||Yes||Battery(s) output||1|
|Charging curve||Algoteck||Temperature compensation||No|
|Ambient temperature sensor||Yes||Temperature remote sensor||No|
|Voltage remote sensor||No||Remote meter||No|
|Panel surge protection(16 V/32 V)||Yes||Controlled output||0|
|Output switch (ON/OFF)||No||Output intensity|
|Overconsumption protection||No||Low battery protection||No|
|Self-consumption||30 mA||Advised capacity of the battery||50 > 800 Ah|
|Temperature of functioning||- 20°C > +60°C||Storage temperature||-35°C > +80°C|
|Maximum cable section||35 mm²||Electronic card protection||varnish|
|Protection class||IP32||Fixation for DIN rail||No|
|Weight||1100 g||Dimensions (WxHxD) without DIN rail||230 x 135 x 47|
View the UNITECK catalogue previewKnow more