Reference : 0989
12V - 10A - MPPT SOLAR CHARGE CONTROLLER
UNISOLAR 30/10.12 S converts the electrical power from your solar panel into charging current for your battery.
UNISOLAR controllers incorporate a unique 6-step charging algorithm : Algoteck 6. Its tests your battery, charges it at 100%, desulfates it, destratifies it, maintains its charge and improves its lifetime. Also, it takes into consideration the ambient temperature in order to adjust its voltage thresholds according to recommendations of the battery manufacturers (integrated temperature sensor).
With its MPPT technology (inverter solar charge controllers), UNIMPPT uses all the panel voltage by reconverting the surplus of panel/battery voltage, not used with a standard charge controller, in charge intensity for the battery.
Its optimized MPPT program, paired up with one of the fastest microprocessors on the market, searches in real-time (every 100ms), the maximum power point of the panel.
UNIMPPT guarantees until 40% more energy during winter and 15% more energy during summer compared to a PWM charge controller, even with changing weather conditions.
|Nominal charging current||10 A||Maximum voltage||30 V|
|Maximum power||150 W||Voltage selection||N/A|
|Type of battery selection||Yes||Battery(s) output||1|
|Charging curve||Algoteck||Temperature compensation||Yes|
|Ambient temperature sensor||No||Temperature remote sensor||No|
|Voltage remote sensor||No||Remote meter||No|
|Panel surge protection(16 V/32 V)||Yes||Controlled output||0|
|Output switch (ON/OFF)||No||Output intensity|
|Overconsumption protection||No||Low battery protection||No|
|Self-consumption||10 mA||Advised capacity of the battery||10 > 200 Ah|
|Temperature of functioning||- 20°C > +60°C||Storage temperature||-35°C > +80°C|
|Maximum cable section||6 mm²||Electronic card protection||varnish|
|Protection class||IP32||Fixation for DIN rail||No|
|Weight||300 g||Dimensions (WxHxD) without DIN rail||120 x 110 x 45|
View the UNITECK catalogue previewKnow more